skip to Main Content

6304 Huck Tools


Rated 0 out of 5
(be the first to review)

Huck® 6304 Hydraulic Riveter; 1.280 Inch Stroke

  • Min Order Qty: 1
  • Qty Interval: 1

Please contact us by phone or email for complete ordering information

CALL NOW 440-899-2810

Category: Tag:


Huck® Hydraulic Riveter, 1.280 Inch (32.51mm) Stroke, 2 gpm (7.57 lpm) Flow Rate, Pull Capacity: 33534lb. at 8400 psi (149.2 at 579 bar), 8400 psi (580 bar) Pull Pressure, 3200 psi (220 bar) Return Pressure, Power Source: Powerig® Hydraulic Unit, Hydraulic Fluid: Automatic Transmission Fluid meeting DEXRON® III, DEXRON VI, MERCON®, Allison C-4 or equivalent, 32 to 125 Deg F (0 to 51.7 Deg C) Operating Temperature, Overall Height: 2.000 Inch (50.80mm), Width of Head: 3.630 Inch (92.20mm), Length of Head: 7.205 Inch (183.00mm), Fastener Type: 5/8 Inch C50L®, Weight 16lb. (7.26kg)

Guides & Manuals

Additional information

Weight23 lbs
Dimensions24 × 12 × 10 in


Pull Pressure     :8400 psi (580 bar)
Hydraulic Fluid     :Automatic Transmission Fluid meeting DEXRON® III, DEXRON VI, MERCON®, Allison C-4 or equivalent
Fastener Type     :5/8 Inch C50L®
Overall Height     :2.000 Inch (50.80mm)
Weight     :16lb. (7.26kg)
Item     :Hydraulic Riveter
Length of Head     :7.205 Inch (183.00mm)
Flow Rate     :2 gpm (7.57 lpm)
Width of Head     :3.630 Inch (92.20mm)
Return Pressure     :3200 psi (220 bar)
Pull Capacity     :33534lb. at 8400 psi (149.2 at 579 bar)
Power Source     :Powerig® Hydraulic Unit
Stroke     :1.280 Inch (32.51mm)
Operating Temperature     :32 to 125 Deg F (0 to 51.7 Deg C)


The 6304 series Hydraulic Installation Tools are used to install C50L and M50L HUCKBOLT® Fasteners. Each tool model has the same eccentric configuration to install fasteners in limited clearance applications. The four tool models vary in size and pull capacity. Each model has a built-in nose assembly designed to install a specific size fastener. These tools are designed to be powered by Huck POWERIG® Hydraulic Units 918, 940, and 956. Powerig Hydraulic Units are preset at the factory to provide 5400-5700 psi PULL pressure and 2200-2400 psi RETURN pressure. They must be reset per applicable instruction manual to provide 8000-8400 psi PULL pressure and 2800-3200 psi RETURN pressure.


There are no reviews yet.

Be the first to review “6304 Huck Tools”

Your email address will not be published. Required fields are marked *

Call Now Button
Back To Top